01527 544 033
Download our new brochure Click Here

T8 Velo Trigger Sprayer

Features

Eye Catching in SIX solid body colours
Stylish in design
Ergonomic for maximum user comfort
Generous with a 1.3ml output
Fully adjustable from a fine mist to a stream

Specifications

1.3 ml output
Standard colours are all white, all red, all blue, all green, all black, all yellow
28mm/400 short cap
Standard dip tube length is 230mm, measured from the gasket seal to the end of the filter

Uses

Kitchen and bathroom cleaners, Glass cleaners, Disinfectants, Fabric cleaners, Carpet cleaners,
De-Icer, De-Greasers, Leak Detectors, Maintenance Oils, Water repellents
Pesticides, Foliar Feed, Weed Killers, Mould & Algae remover
Flea Sprays, Coat Shine, Disinfectants

Materials

Body, shroud, filter, connection, trigger, nozzle, cap: polypropylene
Dip tube, piston: polyethylene
Spring, ball valve: stainless steel
Gasket: Polyethylene/EPE
Spinner valve: POM
O-ring: Nitrile

We can advise as to whether our trigger sprayers are suitable for use with general chemical components, but recommend you carry out trials to ensure compatibility with your own formulation.

Options

Enhance your product with a foaming nozzle
Spray further with a lance extension
Spray directly from a 5 litre container with a long tube version

Tips

Make sure you have the right cap and bottle size

The standard Trigger Sprayers have a 28mm diameter cap with two different heights – Deep (28/410) and Shallow or Short (28/400). In the UK, the most common size for the retail market or Ready to Use (RTU) pack is the 28/410. The industrial/re-useable packs tend to have the 28/400 caps. These references correspond to the necks on the bottle so your bottle manufacturer can confirm what neck is on their bottle. If you have 400 cap on a 410 bottle neck there will be a gap under the cap. If you have a 410 cap on a 400 bottle neck, the pack will not seal on the gasket and it will leak.