01527 544 033
Download our new brochure Click Here

T2 Trio Trigger Foamer


A vertical pump mechanism – lower cost
Foam producing, adding perceived value and giving a visual reminder of which area has been treated
Designed with angular lines, so it is visually smart
Ergonomically designed, making it easy to hold
Fitted with an easy-to-grip square nozzle that can be securely turned on or off.


0.75 ml output
Standard colour is white/white – customised colours are available upon request
28mm/410 deep cap as standard – the 28/400 short cap is available upon request
Standard dip tube length is 260mm, measured from the gasket seal to the end of the tube.


Kitchen and bathroom cleaners
Fabric cleaners
Carpet cleaners
Oven cleaners
Weed Killers


Body, valve case, trigger, nozzle, cap: polypropylene
Spinner, dip tube, piston: polyethylene
Spring, ball valve: stainless steel
Gasket: PEL.

We can advise as to whether our trigger sprayers are suitable for use with general chemical components, but recommend you carry out trials to ensure compatibility with your own formulation.


How can I stop my Trigger Sprayers from leaking?

Trigger sprayers are notorious for ‘backing-off’. The vibration of being ‘in transit’, loosens the cap and leakage can occur. The answer is to have a suitable neck on the bottle – one that suits the trigger cap and if possible, has an anti-back off system in the thread. An anti-back off system has extra pieces in the thread – either a twin thread, vertical pieces or a series of ‘lugs’ around the neck that gives resistance to the cap vibrating loose.

Don’t over tighten the screw cap

It sounds strange but you can over tighten the cap which compresses the Polyethylene neck of the bottle, making the surface hard. The Polypropylene cap has a hard surface too and two hard surfaces together, do not make a good connection. The cap needs to be tight but not over tight.

Make sure you have the right cap and bottle size

The standard Trigger Sprayers have a 28mm diameter cap with two different heights – Deep (28/410) and Shallow or Short (28/400). In the UK, the most common size for the retail market or Ready to Use (RTU) pack is the 28/410. The industrial/re-useable packs tend to have the 28/400 caps. These references correspond to the necks on the bottle so your bottle manufacturer can confirm what neck is on their bottle. If you have 400 cap on a 410 bottle neck there will be a gap under the cap. If you have a 410 cap on a 400 bottle neck, the pack will not seal on the gasket and it will leak.